Sapele wood Drone flute with Cocobolo wood accents and Totem and with Cocobolo wood Carved Feather tuned to the key of E at 432Hz. The wood combination is absolutely gorgeous in my view. This drone has an amazing response and has very crisp clear sound. Check out the video bellow.

This is a 7 hole extended scale drone flute, which has the traditional 6 hole configuration plus a seventh thumb hole on the back of the flute for more expression and creativity. Learning curve is absolutely nonexistent, it is simply a matter of opening the thumb hole, going up the scale (from lower note to higher).

Included with the drone is a leather strap to cover the 7th hole if you decide that you want a 6 hole configuration and are not ready for 7 hole configuration.

Dimentions:

– Overall Lenth – 26 inches
– Bore Diameter – 1 inch
– From mouth end to first hole – 11.5 inches
– From mouth end to last hole – 18 inches
– Largest distance between playing holes – 1 and 3/8th inches
– Largest playing hole diameter – 3/8th of an inch

Native American Style Drone Flute 7 Hole Key of F

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. To play the flute as a standard 6 hole configuration, keep the thumb hole covered.

Materials:

Flute body is made of Padauk wood and the Totem of Birdseye Maple wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 25 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11  inches

– From mouth end to the center of 1st hole – 17 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you. I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents or a stone for inlay are not available, I will let you know and suggest closest replacement, to complement the overall look and color palette of the flute.

Sapele wood Drone flute with Padauk wood Mouth Piece and Totem tuned to the key of E at 432Hz.

 This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. Included with the drone is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Maple wood and the accents are of Padauk wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 22 inches

– Bore Diameter – 7/8th of an inch

– From mouth end to the center of 6th hole – 11 inches

– From mouth end to the center of 1st hole – 17 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 1/2 inches

– Largest playing hole diameter is 5/16th of an inch

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. Included with the drone is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Padauk wood and the accents are of Hard Maple wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 25 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11  inches

– From mouth end to the center of 1st hole – 17 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or 3-4 weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you.

I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents is not available, I will let you know and suggest closest replacement in look and feel, to complement the overall look and color palette of the flute.

Native American Style Drone Flute 7 Hole Key of E

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. To play the flute as a standard 6 hole configuration, keep the thumb hole covered.

Materials:

Flute body is made of Sapele wood and the accents are of Hard Maple wood. The feather is carved of Curly Maple wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Sapele is a dense hardwood and it produces warm yet crisp and concentrated tone with great resonance.

Dimensions:

– Overall Length – 27 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11 and 3/4th inches

– From mouth end to the center of 1st hole – 18 and 1/2 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or 3-4 weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you.

I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents is not available, I will let you know and suggest closest replacement in look and feel, to complement the overall look and color palette of the flute.

Native American Style Flute in the Key of Low C

This is a 7 hole Extended Scale flute with the seventh hole being the thumb hole on the back of the flute. To play the flute as a standard 6 hole configuration, keep the thumb hole covered

Materials:

Flute body is made of Sapele wood and the accents are of Walnut wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Sapele is a dense hardwood and it produces warm yet crisp and clear tone.

Dimensions:

– Overall Length – 26 inches

– Bore Diameter – 1 1/4 inch

– From mouth end to the center of 7th hole – 9 3/4 inches

– From mouth end to the center of 1st hole – 19 1/2 inches

– Largest distance between playing holes (hole 3 to 2) is 2 inches

– Largest playing hole diameter is 7/16th of an inch (hole 3)

This flute has offset playing holes for the Right Hand on The Bottom player.

Flute is tuned to Concert Standard 440Hz.

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or 3-4 weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you.

I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents is not available, I will let you know and suggest closest replacement in look and feel, to complement the overall look and color palette of the flute.

 This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. Included with the drone is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Maple wood and the Totem of Black Locust wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Leather straps are used to hold the Totem to the flute body.

Dimensions:

– Overall Length – 20 and 1/2 inches

– Bore Diameter – 7/8th of an inch

– From mouth end to the center of 6th hole – 10 inches

– From mouth end to the center of 1st hole – 15 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 1/4 inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you. I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents or a stone for inlay are not available, I will let you know and suggest closest replacement, to complement the overall look and color palette of the flute.

Native American Style Drone Flute 7 Hole Key of E

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. To play the flute as a standard 6 hole configuration, keep the thumb hole covered.

Materials:

Flute body is made of Padauk wood and the accents are of Curly Maple wood. Flame carving complements the natural fiery color of the Padauk wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 27 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11 and 3/4th inches

– From mouth end to the center of 1st hole – 18 and 1/2 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 3/8th of an inch

 This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. Included with the drone is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Maple wood and the Totem of Walnut wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Maple is a dense hardwood and it produces crisp and concentrated tone.

Dimensions:

– Overall Length – 21 inches

– Bore Diameter – 7/8th of an inch

– From mouth end to the center of 6th hole – 11 inches

– From mouth end to the center of 1st hole – 16 and 1/2 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 1/4 inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or 3-4 weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you.

I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice or a stone inlay for the accents are not available, I will let you know and suggest closest replacement to complement the overall look and color palette of the flute.

Native American Style Drone flute in the Key of F#

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. To play the flute as a standard 6 hole configuration, keep the thumb hole covered.

Materials:

Flute body is made of Sapele wood and the accents are of Maple wood. The inlay is made of Maple Burl. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Sapele is a dense hardwood and it produces warm yet crisp and clear tone.

Dimensions:

– Overall Length – 24 inches

– Bore Diameter – 7/8 inch

– From mouth end to the center of 7th hole – 9 1/4 inches

– From mouth end to the center of 1st hole – 15 3/4 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 1/4th inches

– Largest playing hole diameter is 3/8th of an inch (hole 3)

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or 3-4 weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you.

I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents is not available, I will let you know and suggest closest replacement in look and feel, to complement the overall look and color palette of the flute.