Sapele wood Drone flute with Cocobolo wood accents and Totem and with Cocobolo wood Carved Feather tuned to the key of E at 432Hz. The wood combination is absolutely gorgeous in my view. This drone has an amazing response and has very crisp clear sound. Check out the video bellow.

This is a 7 hole extended scale drone flute, which has the traditional 6 hole configuration plus a seventh thumb hole on the back of the flute for more expression and creativity. Learning curve is absolutely nonexistent, it is simply a matter of opening the thumb hole, going up the scale (from lower note to higher).

Included with the drone is a leather strap to cover the 7th hole if you decide that you want a 6 hole configuration and are not ready for 7 hole configuration.

Dimentions:

– Overall Lenth – 26 inches
– Bore Diameter – 1 inch
– From mouth end to first hole – 11.5 inches
– From mouth end to last hole – 18 inches
– Largest distance between playing holes – 1 and 3/8th inches
– Largest playing hole diameter – 3/8th of an inch

Sapele wood Drone flute with Padauk wood Mouth Piece and Totem tuned to the key of E at 432Hz.

 This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. Included with the drone is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Maple wood and the accents are of Padauk wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 22 inches

– Bore Diameter – 7/8th of an inch

– From mouth end to the center of 6th hole – 11 inches

– From mouth end to the center of 1st hole – 17 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 1/2 inches

– Largest playing hole diameter is 5/16th of an inch

 This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. Included with the drone is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Maple wood and the Totem of Black Locust wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Leather straps are used to hold the Totem to the flute body.

Dimensions:

– Overall Length – 20 and 1/2 inches

– Bore Diameter – 7/8th of an inch

– From mouth end to the center of 6th hole – 10 inches

– From mouth end to the center of 1st hole – 15 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 1/4 inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you. I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents or a stone for inlay are not available, I will let you know and suggest closest replacement, to complement the overall look and color palette of the flute.

 This is a 7 hole Extended Scale drone flute with the seventh hole being the thumb hole on the back of the instrument. Included with the drone flute is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Sapele wood and the accents are of Hard Maple wood. Flute is finished with Hand Rubbed Polyurethane  and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Citrine Quartz cluster is inlaid into the body of the flute. Leather straps are used to hold Totem to the flute body.

When ordering this flute to be built custom (when Backordered), I may use an Amethyst quartz cluster instead of Citrine cluster due to higher availability of Amethyst crystal, but please to specify if you would prefer the Citrine Quartz instead, as originally Citrine has been chosen to complement the Color of Sapele wood in the flute design.

Dimensions:

– Overall Length – 20 and 1/2 inches

– Bore Diameter – 7/8th of an inch

– From mouth end to the center of 6th hole – 10 inches

– From mouth end to the center of 1st hole – 15 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 1/4 inches

– Largest playing hole diameter is 3/8th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you. I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents or a stone for inlay are not available, I will let you know and suggest closest replacement, to complement the overall look and color palette of the flute.

 This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. Included with the drone is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Maple wood and the accents are of Sapele wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Leather straps are used to hold the Totem to the flute body.

Dimensions:

– Overall Length – 26 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11 and 1/2 inches

– From mouth end to the center of 1st hole – 18 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 3/8th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you. I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents or a stone for inlay are not available, I will let you know and suggest closest replacement, to complement the overall look and color palette of the flute.

Native American Style Drone Flute 7 Hole Key of E

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. To play the flute as a standard 6 hole configuration, keep the thumb hole covered.

Materials:

Flute body is made of Padauk wood and the accents are of Curly Maple wood. Flame carving complements the natural fiery color of the Padauk wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 27 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11 and 3/4th inches

– From mouth end to the center of 1st hole – 18 and 1/2 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 3/8th of an inch

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. Included with the drone is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Padauk wood and the accents are of Sapele wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 27 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11 and 3/4th inches

– From mouth end to the center of 1st hole – 18 and 1/2 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 3/8th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you. I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents or a stone for inlay are not available, I will let you know and suggest closest replacement, to complement the overall look and color palette of the flute.

Native American Style Drone Flute 7 Hole Key of E

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. To play the flute as a standard 6 hole configuration, keep the thumb hole covered.

Materials:

Flute body is made of Sapele wood and the accents are of Hard Maple wood. The feather is carved of Curly Maple wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Sapele is a dense hardwood and it produces warm yet crisp and concentrated tone with great resonance.

Dimensions:

– Overall Length – 27 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11 and 3/4th inches

– From mouth end to the center of 1st hole – 18 and 1/2 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or 3-4 weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you.

I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents is not available, I will let you know and suggest closest replacement in look and feel, to complement the overall look and color palette of the flute.

Native American Style Drone Flute 7 Hole Key of F

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. To play the flute as a standard 6 hole configuration, keep the thumb hole covered.

Materials:

Flute body is made of Padauk wood and the Totem of Birdseye Maple wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 25 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11  inches

– From mouth end to the center of 1st hole – 17 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you. I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents or a stone for inlay are not available, I will let you know and suggest closest replacement, to complement the overall look and color palette of the flute.

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. Included with the drone is a leather strap which you can use to cover the seventh thumb hole to play the flute as a standard 6 hole configuration.

Materials:

Flute body is made of Padauk wood and the accents are of Hard Maple wood. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 25 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11  inches

– From mouth end to the center of 1st hole – 17 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or 3-4 weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you.

I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents is not available, I will let you know and suggest closest replacement in look and feel, to complement the overall look and color palette of the flute.

Native American Style Drone Flute 7 Hole Key of F#

This is a 7 hole Extended Scale drone with the seventh hole being the thumb hole on the back of the flute. To play the flute as a standard 6 hole configuration, keep the thumb hole covered and use it to color your improvisations.

Materials:

Flute body is made of Padauk wood and the accents are of Curly Maple wood. The Feather is carved out of Curly Maple. Flute is finished with Lacquer and the inside of the sound chamber is left unsealed to preserve the natural resonance of wood. Padauk is a dense hardwood and it produces warm yet crisp and concentrated tone.

Dimensions:

– Overall Length – 25 inches

– Bore Diameter – 1 inch

– From mouth end to the center of 6th hole – 11 inches

– From mouth end to the center of 1st hole – 17 inches

– Largest distance between playing holes (hole 3 to 2) is 1 and 3/8th inches

– Largest playing hole diameter is 5/16th of an inch

If the flute is on Backorder:

When the flute is on Backorder it simply means that I would have to build it for you. You can place your order as you would with the regular purchase, the only difference is that it would take me from 2-3 or 3-4 weeks to finish it and mail it to you, depending on the load of present orders. If you don’t mind waiting I would love to recreate the flute for you.

I will do my best to recreate the flute, depending on wood availability from my supplier and my “Cutoff Box” which is where I keep pieces of wood from other flute projects to add accents to new flute orders. If the wood of your choice for the accents is not available, I will let you know and suggest closest replacement in look and feel, to complement the overall look and color palette of the flute.